Sound Distribution logo
apogee-studio-hdr

Switchers

7.1SW Eight Channel Switcher

With the 7.1SW balanced audio switcher you can select any one of four 8 channel balanced audio inputs and route them to an 8 channel balanced output. The inputs and output are on DB25 connectors wired to the Tascam format. Any one of the inputs can be routed to the output via the push buttons on the remote. The remote comes with a 25 foot cable attached to a molded MIDI connector.

7.1SW Front. jpg

5.1 Surround Switcher

Provides precision 5.1 Surround switching for source comparison or alternate speaker selection. The unit provides completely passive relay switching for up to three, six-channel surround paths. The unit can be configured with one input and two outputs as a speaker selector, or two inputs to one output for source comparison. Interconnect with the Coleman SR5.1 is easy with ¼" TRS jacks.

AB51small

Stereo Monitor Switchers

The MS6 adds six stereo returns to any system. This model incorporates completely passive switching and XLR connections for all inputs and outputs.

MS6

MS6small

MS6A

Utilizing active balanced circuitry to preserve signal-to-noise ratio and avoid loading or signal loss, the MS6A also has a separate headphone output with independent level control for direct monitoring and a mono switch to check phase compatibility. This model incorporates XLR connections for all inputs and outputs.

MS6AMsmall

MS8A

The MS8A follows with all the features of the MS6A, and improves the series by increasing the number of switchable sources to eight, and adding an additonal passive fixed level stereo output. This path is perfect for metering or a tape feed. A mono switch allows you to check phase compatibility of a stereo source and the left input only provides mono on all ouputs. This model incorporates ¼" TRS connections for all inputs and outputs.

MS8AMsmall

PS1A

The PS1A provides switching and monitoring control for up to four stereo devices. Easy comparison of input and output of any recording medium. This unit provides a variable level monitor output and two additional fixed outputs for metering, cue feed or master record path (ie; DAT, CD-R, or even linear magnetic media, aka... tape!). The mono switch allows you to check phase compatibility of a stereo source and only feeds the monitor ouput. All connections are via XLR.

PS1AMsmall

Alt Speaker Switching

The SPK5+1 provides switching for five stereo outputs and one stereo sub output from a single stereo input. The sub woofer output is always on unless the sub mute switch is pushed. This allows multiple stereo speakers to be selected with or without the sub woofer. All switching is completely passive.

SPK5+1

SPK5+1small

MS6R

The MS6R provides control for six stereo outputs from a single stereo input. This model incorporates completely passive switching and XLR connections for all inputs and outputs. Unselected outputs are shunted to ground to minimize line noise to amplifiers or powered monitors.

MS6Rsmall
LS3small

With over 1,000 units in the field the LS3 is our most versatile selector for balanced audio routing. The LS3 provides passive switching of three stereo outputs from a single stereo source. Or as a source selector any of three stereo sources to a single stereo output. As a speaker selector, you can select multiple outputs simultaneously. An excellent tool for isolating your subwoofer or using it with multiple pairs of speakers. All inputs and outputs are on ¼" TRS jacks.

LS3

Instrument Switching

The MS6R provides control for six stereo outputs from a single stereo input. This model incorporates completely passive switching and XLR connections for all inputs and outputs. Unselected outputs are shunted to ground to minimize line noise to amplifiers or powered monitors.

MS6R

GT6smal

You are viewing the text version of this site.

To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.

Need help? check the requirements page.


Get Flash Player